TV95 Sand Making Machine

　　TV95 sand making machine is suitable for the crushing and shaping of soft or medium hard and extremely hard materials, widely used in all kinds of ore, cement, refractory, emery, bauxite, glass raw materials, mechanical construction sand and stone and all kinds of metallurgical slag. Especially for silicon carbide, emery, sintered bauxite, magnesia and other high hard, especially hard and corrosion resistant materials than other types of crusher yield effect is higher.

1. Simple structure

2, the product is a cube

3, high efficiency and energy saving, high crushing efficiency

4, low noise, less dust pollution

5, with fine crushing, coarse crushing function

6. Simple operation, convenient installation and maintenance

7. Medium hard and extra hard materials can be broken

    After the material enters the sand making machine from the feed hopper, thematerial is divided into two parts by the dividing crane: one part enters thehigh-speed rotating impeller cavity, which is rapidly accelerated in the impeller cavity, and then the material is evenly thrown in the impeller in theform of an umbrella by the cloth cone, and the instant growth rate is 60-75 m/sand immediately thrown out from the runner. At this time, the first part of the material from the upper part of the material hanger around the self-collectedfall impact broken, and then combined and impact to the vortex lining layer inthe vortex chamber, part of the material

　　And by the material lining rebound oblique upward impact to the top of thevortex chamber, again change its direction of movement, deflect downward andform a continuous material curtain, such a piece of material in the vortex
chamber by two or more impact, friction and grinding and crushing action, thebroken material is discharged from the lower discharge port. In the whole crushing process, the materials also have constant impact and friction with each
other and the material lining board to crush; This process also makes the radius of the material loop movement minimum, so that the crushing efficiency is greatly improved, the powder yield is reduced, and the dust pollution is reduced due to the ingenious air flow self-circulation in the vortex chamber.